YAKPACK seatbag

The seatbag has two parts. The harness part can be attached to the seat tube with Velcro, and then the side straps can be threaded under the saddle bars and attached to the side buckles. The lower part and the seat tube side are thick tarpaulin material, the rest is woven PTP. The harness has two layers everywhere, due to the heavy use. The material of the bag is also impregnated PTP, which is a single layer. After folding back the ends, we can pull them to the seat post with a rope and then tie them on the seat tube. Compared to similar bags, this gives much more stability, even on very bad terrain. It is important that the lower part of the bag is well stuffed and pulled together tightly, because this way it will fit into the harness as best as possible. After securing the bag in place with the back buckle, don't forget to tighten the side buckles. The rear light can be attached to the strap of the rear buckle as needed.

Material: Polyester 30%, PVC 70%
weight: 380 g/m2
UV-res: No
Watertight: yes

You can find a description of the new type of saddlebag attachment here: saddle bag pocketerov1